Stochastic Gravitational Wave Measurements with Bar Detectors: Dependence of Response on Detector Orientation

The response of a cross-correlation measurement to an isotropic stochastic gravitational-wave background depends on the observing geometry via the overlap reduction function. If one of the detectors being correlated is a resonant bar whose orientation can be changed, the response to stochastic gravitational waves can be modulated. I derive the general form of this modulation as a function of azimuth, both in the zero-frequency limit and at arbitrary frequencies. Comparisons are made between pairs of nearby detectors, such as LIGO Livingston-ALLEGRO, Virgo-AURIGA, Virgo-NAUTILUS, and EXPLORER-AURIGA, with which stochastic cross-correlation measurements are currently being performed, planned, or considered.Comment: 17 pages, REVTeX (uses rcs, amsmath, hyperref, and graphicx style files), 4 figures (8 eps image files

Economic Standards for Pedestrian Areas for Disabled People: Results from Observation Work

1.1.1 The Institute for Transport Studies was invited by the Transport and Road Research Laboratory to submit a research proposal, with costs, aimed at establishing suitable "Ergonomic Standards for Pedestrian Areas for Disabled People". The project commenced on 1st July, 1986 and was split into two parts, with part one involving four months' work over the period to 31st December, 1986 and part two finishing on 30th April, 1988. 1.1.2 The -objectives of the study laid down in the design brief by the Transport and Road Research Laboratory were: a) To produce a guide to good practice for the design and maintenance of footways and pedestrianised areas; b) To provide, where possible, recommended standards for design and maintenance. The good practice guide and the recommended standards were to be primarily aimed at disabled people and the elderly, but the requirements of the able-bodied were also to be considered, as were conflicts between the needs of different groups of user. The economic implications of implementation and maintenance were also to be detailed. (Continues..

Economic Standards for Pedestrian Areas for Disabled People: Results of the Initial and Main Interview

1.1.1 The Institute for Transport Studies was invited by the Transport and Road Research Laboratory to submit a research proposal, with costs, aimed at establishing suitable llErgonomic Standards for Pedestrian Areas for Disabled People". The project commenced on 1st July, 1986 and was split into two parts, with part one involving four monthso work over the period to 31st December, 1986 and part two finishing on 30th April, 1988. 1.1.2 The main objectives of the Study laid down in the design brief by the Transport and Road Research Laboratory were: a) To produce a guide to good practice for the design and maintenance of footways and pedestrianised areas; b) To provide, where possible, recommended standards for design and maintenance. The good practice guide and the recommended standards were to be primarily aimed at disabled people and the elderly, but the requirements of the able-bodied were also to be considered, as were conflicts between the needs of different groups of user. The economic implications of implementation and maintenance were also to be detailed

Ergonomic Standards for Pedestrian Areas for Disabled People: Results from Observation Work

1.1.1 The Institute for Transport Studies was invited by the Transport and Road Research Laboratory to submit a research proposal, with costs, aimed at establishing suitable "Ergonomic Standards for Pedestrian Areas for Disabled People". The project commenced on 1st July, 1986 and was split into two parts, with part one involving four months' work over the period to 31st December, 1986 and part two finishing on 30th April, 1988. 1.1.2 The -objectives of the study laid down in the design brief by the Transport and Road Research Laboratory were: a) To produce a guide to good practice for the design and maintenance of footways and pedestrianised areas; b) To provide, where possible, recommended standards for design and maintenance. The good practice guide and the recommended standards were to be primarily aimed at disabled people and the elderly, but the requirements of the able-bodied were also to be considered, as were conflicts between the needs of different groups of user. The economic implications of implementation and maintenance were also to be detailed. (Continues..

Searching for Galactic White Dwarf Binaries in Mock LISA Data using an F-Statistic Template Bank

We describe an F-statistic search for continuous gravitational waves from galactic white-dwarf binaries in simulated LISA Data. Our search method employs a hierarchical template-grid based exploration of the parameter space. In the first stage, candidate sources are identified in searches using different simulated laser signal combinations (known as TDI variables). Since each source generates a primary maximum near its true "Doppler parameters" (intrinsic frequency and sky position) as well as numerous secondary maxima of the F-statistic in Doppler parameter space, a search for multiple sources needs to distinguish between true signals and secondary maxima associated with other, "louder" signals. Our method does this by applying a coincidence test to reject candidates which are not found at nearby parameter space positions in searches using each of the three TDI variables. For signals surviving the coincidence test, we perform a fully coherent search over a refined parameter grid to provide an accurate parameter estimation for the final candidates. Suitably tuned, the pipeline is able to extract 1989 true signals with only 5 false alarms. The use of the rigid adiabatic approximation allows recovery of signal parameters with errors comparable to statistical expectations, although there is still some systematic excess with respect to statistical errors expected from Gaussian noise. An experimental iterative pipeline with seven rounds of signal subtraction and re-analysis of the residuals allows us to increase the number of signals recovered to a total of 3419 with 29 false alarms.Comment: 29 pages, 11 figures; submitted to Classical and Quantum Gravit

Accretion-ejection connection in the young brown dwarf candidate ISO-Cha1 217

As the number of observed brown dwarf outflows is growing it is important to investigate how these outflows compare to the well studied jets from young stellar objects. A key point of comparison is the relationship between outflow and accretion activity and in particular the ratio between the mass outflow and accretion rates ($\dot{M}_{out}$/$\dot{M}_{acc}$). The brown dwarf candidate ISO-ChaI 217 was discovered by our group, as part of a spectro-astrometric study of brown dwarfs, to be driving an asymmetric outflow with the blue-shifted lobe having a position angle of $\sim$ 20$^{\circ}$. The aim here is to further investigate the properties of ISO-ChaI 217, the morphology and kinematics of its outflow, and to better constrain ($\dot{M}_{out}$/$\dot{M}_{acc}$). The outflow is spatially resolved in the $[SII]\lambda \lambda 6716,6731$ lines and is detected out to $\sim$ 1\farcs6 in the blue-shifted lobe and ~ 1" in the red-shifted lobe. The asymmetry between the two lobes is confirmed although the velocity asymmetry is less pronounced with respect to our previous study. Using thirteen different accretion tracers we measure log($\dot{M}_{acc}$) [M$_{sun}$/yr]= -10.6 $\pm$ 0.4. As it was not possible to measure the effect of extinction on the ISO-ChaI 217 outflow $\dot{M}_{out}$ was derived for a range of values of A$_{v}$, up to a value of A$_{v}$ = 2.5 mag estimated for the source extinction. The logarithm of the mass outflow ($\dot{M}_{out}$) was estimated in the range -11.7 to -11.1 for both jets combined. Thus $\dot{M}_{out}$/$\dot{M}_{acc}$ [\Msun/yr] lies below the maximum value predicted by magneto-centrifugal jet launching models. Finally, both model fitting of the Balmer decrements and spectro-astrometric analysis of the H$\alpha$ line show that the bulk of the H I emission comes from the accretion flow.Comment: accepted by Astronomy & Astrophysic

New Coordinates for the Amplitude Parameter Space of Continuous Gravitational Waves

The parameter space for continuous gravitational waves (GWs) can be divided into amplitude parameters (signal amplitude, inclination and polarization angles describing the orientation of the source, and an initial phase) and phase-evolution parameters. The division is useful in part because the Jaranowski-Krolak-Schutz (JKS) coordinates on the four-dimensional amplitude parameter space allow the GW signal to be written as a linear combination of four template waveforms with the JKS coordinates as coefficients. We define a new set of coordinates on the amplitude parameter space, with the same properties, which is more closely connected to the physical amplitude parameters. These naturally divide into two pairs of Cartesian-like coordinates on two-dimensional subspaces, one corresponding to left- and the other to right-circular polarization. We thus refer to these as CPF (circular polarization factored) coordinates. The corresponding two sets of polar coordinates (known as CPF-polar) can be related in a simple way to the physical parameters. We illustrate some simplifying applications for these various coordinate systems, such as: a calculation of Jacobians between various coordinate systems; an illustration of the signal coordinate singularities associated with left- and right-circular polarization, which correspond to the origins of the two two-dimensional subspaces; and an elucidation of the form of the log-likelihood ratio between hypotheses of Gaussian noise with and without a continuous GW signal. These are used to illustrate some of the prospects for approximate evaluation of a Bayesian detection statistic defined by marginalization over the physical parameter space. Additionally, in the presence of simplifying assumptions about the observing geometry, we are able to explicitly evaluate the integral for the Bayesian detection statistic, and compare it to the approximate results.Comment: REVTeX, 18 pages, 8 image files included in 7 figure

Models of helically symmetric binary systems

Results from helically symmetric scalar field models and first results from a convergent helically symmetric binary neutron star code are reported here; these are models stationary in the rotating frame of a source with constant angular velocity omega. In the scalar field models and the neutron star code, helical symmetry leads to a system of mixed elliptic-hyperbolic character. The scalar field models involve nonlinear terms that mimic nonlinear terms of the Einstein equation. Convergence is strikingly different for different signs of each nonlinear term; it is typically insensitive to the iterative method used; and it improves with an outer boundary in the near zone. In the neutron star code, one has no control on the sign of the source, and convergence has been achieved only for an outer boundary less than approximately 1 wavelength from the source or for a code that imposes helical symmetry only inside a near zone of that size. The inaccuracy of helically symmetric solutions with appropriate boundary conditions should be comparable to the inaccuracy of a waveless formalism that neglects gravitational waves; and the (near zone) solutions we obtain for waveless and helically symmetric BNS codes with the same boundary conditions nearly coincide.Comment: 19 pages, 7 figures. Expanded version of article to be published in Class. Quantum Grav. special issue on Numerical Relativit